Installation Instructions
STARTING THE DISHWASHER
The following things should be checked before starting the dishwasher:
1The dishwasher is level and fixed properly
2The water inlet valve is open
3There is no leakage at the connections of the conducts. (Conductors?)
4The wires are tightly connected
5The power is turned on
6Make sure the inlet and drain hoses are not twisted
7All packing materials and removable printings should be taken out from the dishwasher
Care and maintenance
FILTERING SYSTEM
The filter prevents larger remnants of food or other objects from getting inside the pump.
The filter system consists of a coarse filter, a flat (main filter) and a micro filter (fine filter).
3
2
1 
Main filter | 1 |
Food and soil particles trapped by this filter are pulverized by a special jet on the spray arm and washed down to drain.
Fine filter | 2 |
This filter holds soil and food residue in the sump area and
prevents it from being redeposited on the dishes during a wash cycle.
Course filter 3
Larger items, such as pieces of bone or glass, that could block the drain are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and lift it out.
FILTER ASSEMBLY
The filter efficiently removes food particles from the wash water, allowing it to be recycled throughout a cycle. For best performance and results, the filter assembly must be regularly cleaned. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the filter and cup under running water. To remove the filter assembly, pull upward on the cup handle in the upward direction.
17
