Danby DDW611WLED Turn off the dishwasher All the phase lights are off, Open the door carefully

Operating Instructions

STARTING A WASHING PROGRAM

CHANGING THE PROGRAM

FORGOT TO ADD A

DISH?

AT THE END OF THE

WASH CYCLE

You can modify the washing program when the dishwasher just runs for a short time. Otherwise, the detergent may have already been released, and the appli- ance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled.

To change the washing program, press the Start/Reset button to pause the work- ing program, and then press and hold the program button for at least 3 seconds before choosing a different program and resuming the wash cycle.

NOTE: If you open the door during washing, the machine will pause. When you close the door and press the Start/Reset button the washing resumes 10 seconds after you close the door.

The lights show the state of the dishwasher:

a)All phase lights off-----------------------------------On stand by

b)The display has no blinking-----------------------Being paused

c)The display is blinking------------------------------Running

A forgotten dish can be added any time before the detergent cup opens.

1Press the Start/Reset button to pause the cycle.

2Open the door a little to stop the washing.

3After the spray arms stop working, you can open the door completely

4Add forgotten dishes.

5Close the door

6Press the Start/Reset button, the dishwasher will run after 10 seconds.

When the working cycle has finished, the buzzer will sound for 8 seconds, then stop. Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better.

• Turn off the dishwasher All the phase lights are off!

1.Switch off the dishwasher by pressing the ON/OFF button.

2.Turn off the water tap!

• Open the door carefully

Hot dishes are sensitive to impact. The dishes should therefore be allowed to cool down around 15 minutes before being removed from the appliance. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dish- es. This way they will be cooler and the drying will be improved.

• Unloading the dishwasher

It is normal that the dishwasher is wet inside.

WARNING

It is dangerous to open the door during operation because the hot water may scald you.

13