Danby DDW611WLED manual Installation Instructions, For personal safety, Electrical Connection

Installation Instructions

INSTALLATION  PREPARATION

POSITIONING THE APPLIANCE

ABOUT POWER CONNECTION

The installation position of the dishwasher should be near the existing inlet and drain hoses and power cord. One side of the cabinet sink should be chosen to facilitate the connection of drain hoses to the dishwasher.

Position the appliance in the desired location on the countertop.

Make sure the unit is level and is close enough to electrical and water supplies.

WARNING

For personal safety:

•DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.

•DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE

THE GROUNDING CONNECTION FROM THE POWER CORD.

ELECTRICAL REQUIREMENTS

Please look at the rating label to know the voltage rating and connect the dish- washer to the appropriate power supply. Use the required 15 amp fuse, time delay fuse or circuit breaker recommended and provide separate circuit serving only for this appliance.

ELECTRICAL CONNECTION

Ensure that the voltage and frequency of the power being used corresponds to those on the rating plate. Only insert the plug into an electrical socket which is grounded properly. If the electrical socket to which the appliancemust be connect- ed is not appropriate for the plug:

•Have the socket replaced by a qualified professional.

• Avoid using adaptors because they could cause overheating and burns.

WARNING

Ensure appliance is properly grounded before use.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resist- ant electric current. This appliance is equipped with

a cord that has an equipment-grounding conductor and a grouding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accor- dance with all local standards and requirements.

WARNING

•Improper connection of the equipment grounding conductor can result in the risk of an electric shock.

•Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly grounded.

•Do not modify the plug provided with the appliance. If the plug does not fit properly in the outlet, please have a qualified electrician install a proper outlet.

14