Replacement Procedures
4.17 B CAS Board
The following describes for removing the B CAS Board (See Figure
Removing the B CAS Board
1.Pull out the B CAS FFC from USB board connector.
2.Loose the below screws and then incline pull out B CAS board.
∙ | M2.5x3 | FLAT BIND screw | x4 |
Figure 4-17-1 Remove the B CAS Board
Installing the B CAS Board
The following describes the procedure for installing the B CAS board.
1.Insert the B CAS board into base case and connect B CAS board FFC.
2.Fix the below screws
M2.5x3 | FLAT BIND screw | x4 |
|
|
Qosmio X500 Maintenance Manual |
