Display assembly, Removing the display assembly

Replacement Procedures

4.13 Display assembly

The following describes the procedure for removing the display assembly (See Figure 4-13-1 to 4-13-5).

1.Close the display and turn the computer upside down.

2.Remove the battery pack (See Figure 4-2-1)

3.Remove the Main HDD door screws and open the MAIN HDD Door, remove Optical Drive Disk.

	M2.5×4.0 FLAT BIND screw	x2
	M2.5×3.0 FLAT BIND screw	x1

4.Open the SECOND HDD Door.

5.Remove the screws from the bottom side.


Qosmio X500 Maintenance Manual (960-Q08)	4-37