Bluetooth module Remove a Bluetooth module

Replacement Procedures

4.11 Bluetooth module

The following describes the procedure for removing a Bluetooth module(see Figure4-11-1)

1.Disconnect the Bluetooth cable from motherboard side

2.Remove the following screw from TOP case and remove the Bluetooth bracket

 2.5.0 x 3.0B BIND screwx1

3. Remove the Bluetooth module

The following describes the procedure for installing a Bluetooth module.

1.Insert a Bluetooth into the connector on the computer.

2.Connect the Bluetooth cable to the terminals on a Bluetooth and connect it to the motherboard side.

3.Install the Bluetooth bracket and secure it with following screw.

 2.5.0 x 3.0B

BIND screw

4-34