Keyboard, Removing the keyboard | Toshiba X500 specification

Replacement Procedures

4.9Keyboard

The following describes the procedure for removing the keyboard (See Figure 4-9-1).

CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the frame and do not touch the keycap.

1.Upside down the computer.

2.Open the display.

3.Remove KBD holder. Insert your finger into the slot between the KBD holder and the keyboard. Then, lift up the keyboard cover to remove it.

4.Loose the screw securing KBD Holder.

M2.5x3.0B Flat BIND screws x4

5.Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to remove it.

6.Disconnect keyboard cable.

4-28