2 Troubleshooting Procedures
2.3Power Supply Troubleshooting
The power supply controller controls many functions and components. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the other Procedures as instructed. The procedures described in this section are:
Procedure 1: Power Status Check
Procedure 2: Connection Check
Procedure 3: Charging Check
Procedure 4: Replacement Check
Procedure 1 Power Status Check
The following LED indicates the power supply status:
Battery LED
DC IN LED
The Power Supply control displays the power supply status with the Battery LED and the DC IN LED as listed in the tables below.
| Table |
|
|
Battery icon | Power supply status |
|
|
Lights orange | Battery is charged and the AC adapter is connected. It has |
| no relation with ON/OFF of the system power. |
Lights red | Battery is fully charged and the AC adapter is connected. It |
| has no relation with ON/OFF of the system power. |
|
|
Blinks orange | The battery level is low while the system power is ON. |
(even intervals) |
|
|
|
Blinks orange once | The system is driven by only a battery and the battery level |
(at being switched on) | is low. |
Doesn’t light | Any condition other than those above. |
|
|
Qosmio X500 Maintenance Manual |
| 7 |
