Avaya P330-ML-ML P330-1super#set port dot1x quiet-period 4/2, Set port dot1x re-authenticate

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

set port dot1x quiet-period <module/port> <seconds>

module/	Module and port number (or range of ports)
port
seconds	Number of seconds – 0 to 65535
Example:

P330-1(super)#set port dot1x quiet-period 4/2 300

set port dot1x re-authenticate

User level: supervisor

Use the set port dot1x re-authenticatecommand to set the port to re- authenticate.

The syntax for this command is:

set port dot1x re-authenticate <module/port>

module/ Module and port number (or range of ports) port

Example:

P330-1(super)#set port dot1x re-authenticate 1/2 port 1/2 is not in authenticating process

set port dot1x re-authentication

User level: supervisor

Use the set port dot1x re-authenticationcommand to set the re- authentication mode per port.

The syntax for this command is:

set port dot1x re-authentication <module/port> <mode>

module/	Module and port number (or range of ports)
port
mode	enable disable

88 Avaya P330-ML Reference Guide