Chapter 2 Avaya P330-ML Layer 2 CLI Commands
show port redundancy
User level: user, privileged, supervisor
Use the show port redundancy command to display information about the port redundancy schemes defined for the switch. The “status” column displays which of the two redundancy member ports is enabled currently.
The syntax for this command is:
show port redundancy
Example:
P330-N>show port redundancy
Redundancy Name | Primary Port | Secondary Port | Status |
gregory | 3/48 | 3/47 | secondary |
reuven | 3/46 | 3/45 | secondary |
meir | 3/1 | 3/2 | primary |
arie | 3/34 | 3/33 | secondary |
Port Redundancy global state is enable
Minimum Time between Switchovers: 1
Switchback interval: 3
show port security
User level: user, privileged, supervisor
Use the show port security command to list the security mode of the ports of a switch or stack. When no port number is specified, this command displays all the secured ports in the stack.
The syntax for this command is:
show port security [<module>[/<port>]]
Example:
P330-N>show port security 1
Violation | action is restrict and notify |
Port | Status |
1/1 | enabled |
1/2 | disabled |
1/3 | disabled |
... |
|
168 | Avaya |
