
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N# set interface ppp enable
Entering the Modem mode within 60 seconds...
Please check that the proprietary modem cable is plugged into the console port
Example:
P330-N# set interface ppp disable
Entering the Terminal mode immediately
set intermodule port redundancy
User level: privileged, supervisor.
Use the set intermodule port redundancy command to define the stack’s unique intermodule redundancy scheme. The defined scheme can be cleared using the set intermodule port redundancy off command.
You must disable Spanning Tree before you can enable intermodule port redundancy.
The syntax for this command is:
set intermodule port redundancy
Primary port number | |
Secondary port number | |
on | Set the intermodule redundancy |
name | Name of the fast redundancy (default is |
| 'intermodule') |
Example: |
|
P330-N# set intermodule port redundancy 1/7 2/12 on backbone
backbone: port 2/12 is intermodule redundant to port 1/7
If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".
70 | Avaya |