Avaya P330-ML-ML Set intermodule port redundancy off, P330-N#set intermodule port redundancy off

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

set intermodule port redundancy off

Use the set intermodule port redundancy off command to clear the intermodule port redundancy scheme.

The syntax for this command is:

set intermodule port redundancy off

Example:

P330-N#set intermodule port redundancy off

Intermodule port redundancy entry deleted.

set internal buffering

User level: privileged, supervisor.

This command is not relevant to P330-ML-ML switches. It appears in the P330- ML-ML CLI for controlling internal buffering of other P330-ML switches in the stack.

The set internal buffering command allows you to set the size (Maximum, Medium, and Minimum) of the Receive (Rx) buffer allocated to each port of the specified switch. This command is meaningless when any port of the switch is operating with flow control ON.

The syntax for this command is:

set internal buffering <module> {value}

module	Module number in the stack
value	max - sets the internal receive buffer to its maximum size
	med - sets the internal receive buffer capacity dynamically
	min - sets the internal receive buffer to its minimum size
	Default is min
Example:

P330-N#set internal buffering 1 max

Done.

Avaya P330-ML Reference Guide 71