Avaya P330-ML-ML manual Set spantree default-path-cost, Set spantree disable, Set spantree enable

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

set spantree default-path-cost

User level: privileged, supervisor.

Use the set spantree default-path-costcommand to set the version of the spanning tree default path costs that are to be used by this bridge.

The syntax for this command is:

set spantree default-path-cost <path-cost>

path-cost	common-spanning-tree - compatible with ieee802.1D standard
	rapid-spanning-tree - compatible with ieee802.1W standard
Example:

P330-N#set spantree default-path-cost rapid-spanning-tree

Spanning tree default path costs is set to rapid spanning tree.

set spantree disable

User level: privileged, supervisor.

Use the set spantree disable command to disable the spanning-tree algorithm for the switch.

When you disable STP, blocking ports are disabled in order to prevent loops in the network. As a result, you need to wait 30 seconds before disabling STP if you reset the switch, enable STP, or insert a new station.

The syntax for this command is:

set spantree disable

Example:

P330-N#set spantree disable

bridge spanning tree disabled.

set spantree enable

User level: privileged, supervisor.

Use the set spantree enable command to enable the spanning-tree algorithm for the switch.

When you disable STP, blocking ports are disabled in order to prevent loops in the network. As a result, you need to wait 30 seconds before disabling STP if you reset the switch, enable STP, or insert a new station.

Avaya P330-ML Reference Guide 117