Avaya P330-ML-ML manual Fragment chain, Router-N#fragment chain, Fragment size

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

Example:

Router-N(configure router:rip)# exit

Router-N(configure)#

fragment chain

Use the fragment chain command to set the maximum number of fragments that can comprise a single IP packet destined to the router. Use the no form of this command to set the fragment chain to the default value (64).

The router does not perform reassembly of packets in transit.

The syntax for this command is:

[no] fragment chain <chain-limit>

chain-limit	The maximum number of fragments that can comprise a single IP
	packet, from 2 to 2048. The default is 64.

Example:

Router-N#fragment chain 30

fragment size

Use the fragment size command to set the maximum number of fragmented IP packets, destined to the router, to reassemble at any given time. Use the no form of this command to set the fragment size to the default value (100).

The router does not perform reassembly of packets in transit.

The syntax for this command is:

[no] fragment size <database-limit>

database-limit	The maximum number of packets undergoing re-assembly at
	any given time, from 0 to 200. The default is 100.

224 Avaya P330-ML Reference Guide