Chapter 2 Avaya P330-ML Layer 2 CLI Commands
set powerinline external power
User level: privileged, supervisor.
This command applies to
Use the set powerinline external power command to set the maximum power available from the external power supply to power DTEs.
The syntax for this command is:
set powerinline external power <module_number> <power>
module_number | Number of the module for which external power is to be |
| allocated |
power | Value of the maximum power allocated to powering DTEs |
| in Watts. |
Example: |
|
P330-N# set powerinline external 2 200
external power set to 200Watts
set ppp authentication incoming
User level: privileged, supervisor.
Use the set ppp authentication command to define the authentication method used for a PPP server or client session.
The syntax for this command is:
set ppp authentication incoming {papchapnone}
pap | PAP authentication method |
chap | CHAP authentication method |
none | No authentication |
Example: |
|
P330-N# set ppp authentication incoming chap
PPP requires CHAP authentication for incoming sessions.
106 | Avaya |
