Avaya P330-ML-ML manual Copy scp startup-config filename ip

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

copy scp startup-config

User level: supervisor

Use the copy scp startup-configcommand to download a startup configuration to the device via SCP.

Only parameters that differ from the factory default settings for the switch are included in the configuration file. Therefore, it is important to reinitialize the NVRAM to the factory default settings before downloading configuration files to the switch. To reinitialize the NVRAM, run the nvram initialize command.

The syntax for this command is:

copy scp startup-config <filename> <ip>

filename	Source file name on the SCP server (full path).
ip	The ip address of the SCP server.

Example (for Windows):

P330-N#copy scp startup-config c:\P330-ML\startup.cfg 149.49.100.41 Username: 330user

Password:

Beginning download operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show download status' command

********************************************************************

*If you are currently running the P330-ML Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

Avaya P330-ML Reference Guide 23