
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
set system name
User level: privileged, supervisor.
Use the set system name command to set the mib2 system name MIB variable. The syntax for this command is:
set system name [string]
string | • | The system name string should be typed inside inverted |
|
| commas. |
| • | The name is cleared if you leave this field blank. |
Example: |
|
|
P330-N# set system name “P330-ML-1”
*** Set system name ***
system name set
If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
set terminal recovery password disable
User level: supervisor
Use the set terminal recovery password disable command to disable the recovery password feature.
This command can only be run from the console port on the device.
If the recovery password feature is disabled and you forget your login and password, you will not be able to access the device.
The syntax for this command is:
set terminal recovery password disable
Example:
P330-N# set terminal recovery password disable
Done!
set terminal recovery password
User level: supervisor
Use the set terminal recovery password enable command to enable the recovery password feature.
122 | Avaya |