Chapter 2 Avaya P330-ML Layer 2 CLI Commands
source | source ip address |
destination | destination ip address |
protocol | ip tcp udp integer (1...255) |
source port | integer (1...65535) |
destination port | integer (1...65535) |
established | value of TCP established bit |
Example: |
|
Router-N(configure)# ip simulate 100 192.67.85.12 193.76.54.25
ip ssh enable
User level: supervisor
Use the ip ssh command to enable the SSH server.
The syntax for this command is:
ip ssh enable
Example:
P330-N# ip ssh enable
Done!
ip telnet enable
User level: supervisor
Use the ip telnet enable command to enable Telnet access to the device.
The syntax for this command is:
ip telnet enable
Example:
P330-N# ip telnet enable
Done!
Avaya | 43 |
