Avaya P330-ML-ML manual Show powerinline

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-N>show port vlan-binding-mode port 2/1 is statically bound port 2/2 is statically bound port 2/3 is statically bound port 2/4 is statically bound port 2/5 is statically bound port 2/6 is statically bound port 2/7 is statically bound port 2/8 is statically bound port 2/9 is statically bound port 2/10 is statically bound

Show powerinline

User level: user, privileged, supervisor

This command applies to P333T-PWR switches only and is used by P330- ML-ML switches to control P333T-PWR modules in the stack.

Use the show powerinline command to display the current status of the PD inline power on all ports.

The syntax of this command is:

show powerinline <mod_number [/<port_number>]>

170 Avaya P330-ML Reference Guide