
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
show port edge state
User level: user, privileged, supervisor
Use the show port edge state command to show a port’s edge admin and operational RSTP state.
A port can be set to admin state of edge port, but if a BPDU is received on this port the oper state is changed to
The syntax for this command is:
show port edge state <module/port>
module/ | Port identifier |
|
port |
|
|
Example: |
|
|
| ||
| ||
Port | admin state | oper state |
1/1 | ||
1/2 | ||
|
|
|
show port flowcontrol
User level: user, privileged, supervisor
Use the show port flowcontrol command to display
The syntax for this command is:
show port flowcontrol [<mod_num>[/<port_num>]]
module | Number of the switch . If you do not specify a number, all |
(Optional) | switches are shown. |
port | Number of the port on the switch. If you do not specify a |
(Optional) | number, all ports on the specified switch are shown. |
Example: |
|
P330-N>show port flowcontrol 3/4
Port | ||||
| Admin | Oper | Admin | Oper |
3/4 | off | off | off | off |
Avaya | 165 |