Avaya P330-ML-ML Copy running-config startup-config, P330-N#copy running-config startup-config

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Example:

P330-N# copy running-config scp c:\config\switch1.cfg 192.168.49.10 5

Username: 330user

Password:

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'show upload status' command

********************************************************************

*If you are currently running the P330-ML Device Manager application,*

*it is recommended to exit from it before performing configuration*

* download operations.*

********************************************************************

copy running-config startup-config

User level: supervisor

This command applies to the P334T-ML only when it is in “Layer2” device mode.

Use the copy running-configstartup-configcommand to copy the active policy configuration to the startup configuration file in the NVRAM.

The syntax for this command is:

copy running-config startup-config

Example:

P330-N#copy running-config startup-config

copy running-config tftp

User level: supervisor

This command applies to the P334T-ML only when it is in “Layer2” device mode.

Use the copy running-config tftp command to upload the policy configuration to a TFTP server.

The syntax for this command is:

copy running-config tftp <filename> <ip>

filename Destination file name in the tftp server (full path).

18 Avaya P330-ML Reference Guide