Avaya P330-ML-ML manual Disconnect ssh

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Output Fields:
Field	Description
M#	The switch number
file	There are several files loaded into the switch’s memory:
	• module-config – file which contains the configuration
	settings made to this switch
	• stack-config – file which contains the configuration settings
	made at the stack level (for example IP address of the stack)
	• EW_Archive – file which contains the Device Manager
	(Embedded Web) software
	• Booter_Image - file containing the booter code executed
	after rest. This file Can’t be replaced by the user.
	• startup-config - file which contains the startup (saved in
	NVRAM) configuration for policy and routing in the P330-
	ML-ML, P333R, and P333R-LB
	• running-config - file which contains the running (currently
	active) configuration for policy and routing in the P330-ML-
	ML, P333R, and P333R-LB
ver num	S/W Version number – relevant only for Device Manager and
	Booter image.
file type	There are several file types:
	• Running Conf – the configuration currently in use.
	• Startup-config - startup configuration for policy and routing
	in the P330-ML-ML, P333R, and P333R-LB
	• SW boot image - Booter file
	• SW Web Image – Device Manager S/W archive file
file location	Type of internal memory into which the file is loaded
file description	Description of the file

If N/A is displayed for the EW_Archive file, this means that the Device Manager software is not loaded correctly. Download the Device Manager software again.

disconnect ssh

User level: supervisor

Use the disconnect ssh command to disconnect an SSH session.

34 Avaya P330-ML Reference Guide