Avaya P330-ML-ML manual P330-Nset port dot1x max-req 1/2, Set port dot1x port-control, Authorize

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

The syntax for this command is:

set port dot1x max-req <module/port> <count>

module/	Module and port number (or range of ports)
port
count	Number of attempts — 1-10
Example:

P330-N>set port dot1x max-req 1/2 5

set port dot1x port-control

User level: supervisor

Use the set port dot1x port-controlcommand to set the dot1x parameter per port.

The syntax for this command is:

set port dot1x port-control <module/port> <mode>

module/	Module and port number (or range of ports)
port
mode	force-unauthorize - the port is always is blocking state
	auto - forwarding/blocking depends on authorization outcome
	force-authorize - the port is always in forwarding state
Example:
P330-1(super)#set port dot1x port-control 2/3 force-
authorize
port 1/2 control was set to force-authorize

set port dot1x quiet-period

User level: supervisor

Use the set port dot1x quiet-periodcommand to set the 802.1x quiet period per port.

Avaya P330-ML Reference Guide 87