Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N# set logging server enable 149.49.35.21
Done!
set logging server facility
User level: privileged, supervisor.
Use the set logging server facility command to update the server facility used for sending messages to Syslog server. Facility settings are done on per Syslog server.
You need to define a logging server using the set logging server command before you can set the server facility.
The syntax for this command is:
set logging server facility
The facility used for sending messages to the Syslog server. | |
| Possible values are: |
| • kern – Kernel |
| • user – User processes |
| • mail – Electronic mail |
| • daemon – Background system processes |
| • auth – Authorization |
| • syslog – System logger |
| • lpr – Printer |
| • news – Usenet news |
| • uucp – |
| • clkd – Clock daemon |
| • sec – Security |
| • ftpd – FTP daemon |
| • ntp – NTP subsystem |
| • audi – Log audit |
| • alert – Log alert |
| • clkd2 – Clock daemon |
| • |
The IP address of the Syslog server. |
Avaya | 79 |
