Seagate 240 DDS-4 manual Write-enabled Write-protected, Preparation for shipping

A-38 Scorpion 240 Autoloader Installation Manual

Figure 14 shows how to write-protect a Scorpion 240 magazine. To enable writing to the magazine, move the switch upward. To protect all tapes in the magazine from being written to, move the switch down.

Figure 14. Write-protect switch on autoloader magazine

Write-enabled

Write-protected

Preparation for shipping

Before shipping the Scorpion 240, you must secure the autoloader door to prevent damage to the drive. Follow the procedure below to secure the door as the last step before switching off the autoloader:

1.Make sure there is no magazine in the autoloader. The LCD should display the message “NO MAGAZINE.”

2.Press and hold the Select button for 5 seconds. The LCD should show the following menu:

>VERSION LANGUAG CONTRAST

3.Press the Select button four times. The curser (>) will move down to the word “DOOR,” as shown below:

CONTRAST AUTO/LD

>DOOR