Seagate 240 DDS-4 manual Connecting a power cable

Scorpion 240 Autoloader Installation Manual A-17

chain and attach an LVD/single-ended multi-mode terminator to the last connector in the chain.

Figure 5. Two SCSI termination examples for the internal Scorpion 240.

SCSI Terminator

Internal

Tape drive

(no

termination)

SCSI device

(termination enabled)

Internal

Tape drive

(no termination)

SCSI device

(termination disabled)

SCSI device

(termination disabled)

SCSI Controller

(termination enabled)

SCSI Controller

(termination enabled)

Connecting a power cable

Attach a 5/12-volt, four-pin power cable to the power connector on the back of the drive. Figure 4 on the previous page shows the location of the power connector.

The recommended 4-pin power connector for the internal drive is an AMP 1-48024-0 housing with AMP 60617-1 pins or equivalent.