Seagate 240 DDS-4 manual Mounting the internal autoloader, Locations of mounting holes

Scorpion 240 Autoloader Installation Manual A-15

Mounting the internal autoloader

The Scorpion 240 must be mounted horizontally in a 5.25- inch, full-height drive bay. Mount the drive using four M3.0 metric screws on the sides or bottom of the drive, as shown in Figure 3. Do not use screws longer than 4 mm or you may damage the drive.

Note. When mounting the drive, make sure that nothing blocks the exhaust fan or the ventilation slots on the bottom and rear of the autoloader.

Figure 3. Locations of mounting holes

86±0.25	0.25
	1.8±

7.0 ± 0.3

±0.25 149.6

45.5 ± 0.25		79.5 ± 0.25
			MOUNT HOLE
			M3 (4 PLACES)
	203.2 ± 0.25
		224.0 max

±0.25 1.8

		MOUNTING HOLE
45.5 ± 0.25	79.5 ± 0.25	M3 (4 PLACES)
	203.2 ± 0.5

±0.3 11.9

139.7±0.3	–0.5
	146+1.5

±0.3 21.8

0.6± 82.6

224.0 max