Seagate 240 DDS-4 manual LCD Message Description

Scorpion 240 Autoloader Installation Manual		A-31
LCD Message	Description
CASSETTE INSTALL	A cartridge has been inserted into the magazine incorrectly.
PROBLEM	Eject the magazine from the autoloader (see page A-22);
	then remove the cartridge from the magazine and reinsert it
	correctly.
CHECK DOOR	The autoloader door is open.
CLEANING	The autoloader is loading a cleaning cartridge into the drive.
CLEANING REQUIRED	The tape drive requires cleaning.
DOOR LOCKED	The autoloader door is locked.
DOOR UNLOCKED	The autoloader door is unlocked.
DRIVE ERROR	There is a problem with the tape drive. For additional
04/XX/XX	information, contact Seagate technical support.
ERASE TAPE X	The tape drive is erasing the tape cartridge from slot X.
EJECTING MAGAZINE	The autoloader is ejecting the tape magazine.
EJECT?	A tape resides in the drive and the Eject button has been
PRESS ENTER	pressed. Eject confirmation is required before the tape can
	be ejected.
EJECT PREVENT	The autoloader is preventing you from ejecting the
	magazine because the software has enabled PMR (Prevent
	Media Removal).
FAN FAILURE	There is a problem with the autoloader fan. Contact
	Seagate technical support.
INSERT EMPTY	The autoloader cannot unload a tape from the tape drive to
MAGAZINE	the magazine because the magazine in the autoloader is
	fully loaded. Eject the magazine; then insert an empty
	magazine into the autoloader. For more information on
	ejecting a magazine, see “Ejecting the magazine” on page
	A-22.
LOADER ERROR	There is a problem with the autoloader hardware. For
04/XX/XX	additional information, contact Seagate technical support.
LOAD TAPE X	The tape drive is loading the tape cartridge from slot X.
MEDIA ERROR	There is a problem with the tape cartridge. For additional
03/XX/XX	information, contact Seagate technical support.
NO MAGAZINE	There is no magazine in the autoloader.
READ TAPE X	The tape drive is reading from a tape