Seagate 240 DDS-4 manual Ready

A-32	Scorpion 240 Autoloader Installation Manual
LCD Message	Description
READY	The autoloader has scanned all cartridge slots in the
	magazine and is ready to perform an action.
READY TAPE X	There is a tape (from slot X) in the tape drive and the
	autoloader is ready to accept commands.
REPLACE CLEANING	The cleaning cartridge has been used up and must be
TAPE	replaced with a new cleaning cartridge.
REWIND TAPE X	The tape drive is rewinding the tape cartridge from slot X.
SCAN X	The autoloader is sequentially scanning the cartridge slots
	in the magazine.
SEARCH TAPE X	The tape drive is searching the tape cartridge from slot X.
SELECT X	This message displays when you press the Select button.
PUSH ENTER	Press the Select button repeatedly to display the desired
	tape number (X); then press the Enter button to load the
	selected tape into the drive.
SELECT PREVENT	The autoloader is preventing you from selecting a tape to
	load because a Prevent Media Removal command has
	been issued by the host. This prevents the tape that is in
	the drive from being ejected.
UNLOAD TAPE X	The tape drive is unloading the tape cartridge from slot X.
UPDATING FIRMWARE	The autoloader or tape drive firmware is being updated.
WAITING	This message displays while the tape drive is performing a
SELFTEST	Power-On Self-Test (POST) during startup.
WRITE TAPE X	The tape drive is writing to the tape cartridge from slot X.