Seagate 240 DDS-4 manual LED Code summary, Clean, Media, Drive

Scorpion 240 Autoloader Installation Manual A-29

LED Code summary

The following table summarizes LED flash codes for the

Scorpion 240.

LED	Action	Meaning
Clean	ON (lit)	Cleaning is required because the
		drive has been operated for at least
		25 hours (DDS-1 and DDS-2) or 50
		hours (DDS-3 or DDS-4).
	Flashing	The internal error rate threshold has
	Slowly	been exceeded and cleaning is
		required.
	Flashing	The cleaning cartridge in the drive
		has exceeded its useful life.
		Replace the old cleaning cartridge
		with a new one.
Media	ON (lit)	A cartridge is inserted and is not
		generating excessive errors.
	Flashing	The drive could not write the tape
		correctly (a write error has
		occurred). Use a Seagate-approved
		cleaning cartridge to clean the drive.
Drive	ON (lit)	The drive is reading or writing the
		tape normally.
	Flashing	A hardware fault occurred.
	Rapidly