Seagate 240 DDS-4 manual Operation and maintenance, Starting the autoloader

Scorpion 240 Autoloader Installation Manual A-21

Operation and maintenance

This section describes how to use your Scorpion 240 autoloader and DDS-4 cartridges. It also explains how to interpret the LEDs and the display on the front of the drive, which are shown in Figure 8.

Figure 8. Front view of internal Scorpion 240 autoloader (external drive is similar)

			EJECT
			Button
			SELECT
			Button
			ENTER
			Button
		Drive	LCD
Clean	Media		Display
LED		LED
	LED
(green)		(amber)
	(green)

Starting the autoloader

Turn on all SCSI devices attached to your computer before you turn on the computer. When the autoloader is first started, the following events should occur:

1.The Clean, Media, and Drive LEDs light up for two seconds, then start flashing.

2.The LCD display shows the current SCSI ID, followed by the message, “WAITING SELFTEST.”

3.If a magazine is loaded, the LCD display shows the message “SCAN X” while the drive determines which slots in the magazine contain cartridges.