Lenovo 8098 manual Hardware Maintenance Manual

10.Lower the microprocessor retainer
3 and then secure the retainer with the lever
2.

Note: If you are replacing the system board, a black protective cover on the retainer protects the microprocessor socket. When you close the retainer, remove the cover.

11.Slide the heat sink
2 under the lip and into position on the microprocessor. Lower the lever
1 to secure the heat sink.

Note: When you receive a new microprocessor, you will also receive a new heat sink. You must install a new heat sink when replacing the microprocessor.

12.If you are replacing the system board, continue at “Removing and replacing the system board” on page 101.

108Hardware Maintenance Manual