Lenovo 8098 manual Removing and replacing memory

Removing and replacing memory

1.Open the cover. See “Opening the cover” on page 138.

2.Locate the memory connectors. See “Identifying parts on the system board” on page 140.

3.Open the retaining clips to remove an existing memory module.

4.Make sure the memory module notch
1 is aligned correctly with the connector key
2 on the memory connector. Insert the memory module straight down into the connector until the retaining clips close.

5.To complete the installation, go to “Closing the cover and connecting cables” on page 159.

Chapter 10. Replacing FRUs (Types 8098, 8171, 8172, 8173, 8424, and 8425) 141