Lenovo 8098 manual Replacing FRUs Types 8143, 8144, 8146, 8422, 8423, and 8427

6.Disengage the system board from the chassis by sliding it toward the front of the computer and then lift it out.

7.Place the defective system board next to the new system board on a clean, flat surface.

8.Note the location of the memory modules and remove them from the failing system board and install them on the new system board in the same location as they were on the failing system board. See “Removing and replacing memory” on page 119.

9.Remove the heat sink and microprocessor from the failing system board and install them on the new system board. Go to “Removing and replacing the microprocessor” on page 126.

Return here after removing and replacing the microprocessor.

Chapter 9. Replacing FRUs (Types 8143, 8144, 8146, 8422, 8423, and 8427) 125