Lenovo 8098 manual Diagnostic error codes

Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See “Running diagnostics tests” on page 50 for the specific type for information about the Diagnostic programs.

In the following index, X can represent any number.

Diagnostic Error Code	FRU/Action
000-000-XXX	No action
BIOS Test Passed
000-002-XXX	1.	Flash the system. See “Flash update
BIOS Timeout
		procedures” on page 338
	2.	System board
000-024-XXX	1.	Flash the system. See “Flash update
BIOS Addressing test failure
		procedures” on page 338
	2.	System board
000-025-XXX	1.	Flash the system. See “Flash update
BIOS Checksum Value error
		procedures” on page 338
	2.	Boot block
	3.	System board
000-026-XXX	1.	Flash the system. See “Flash update
FLASH data error
		procedures” on page 338
	2.	Boot block
	3.	System board
000-027-XXX	1.	Run Setup
BIOS Configuration/Setup error
	2.	Flash the system. See “Flash update
		procedures” on page 338
	3.	Boot block
	4.	System board
000-034-XXX	1.	Reboot the system
BIOS Buffer Allocation failure
	2.	Flash the system. See “Flash update
		procedures” on page 338
	3.	Run memory test
	4.	System board
000-035-XXX	1.	Flash the system. See “Flash update
BIOS Reset Condition detected
		procedures” on page 338
	2.	System board
000-036-XXX	1.	Flash the system. See “Flash update
BIOS Register error
		procedures” on page 338
	2.	Boot block
	3.	System board
000-038-XXX	1.	Flash the system. See “Flash update
BIOS Extension failure
		procedures” on page 338
	2.	Adapter card
	3.	System board

Chapter 7. Symptom-to-FRU Index 61