Lenovo 8098 manual Removing and replacing the power supply

Removing and replacing the power supply

Attention

Never remove the cover on a power supply or any part that has the following label attached.

Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no servicable parts inside these components.

1.Remove the cover. See “Removing the cover” on page 92.

2.Remove the four screws at the rear of the chassis.

3.Rotate the drive bay assembly upward to gain access to the system board. Note of the routing of the power supply cables.

Chapter 8. Replacing FRUs (Types 8095, 8141, 8142, 8145, 8420, and 8421) 99