Lenovo 8098 manual Hardware Maintenance Manual

Diagnostic Error Code	FRU/Action
000-039-XXX	1.	Flash the system. See “Flash update
BIOS DMI data error
		procedures” on page 338
	2.	System board
000-195-XXX	Information only
BIOS Test aborted by user	Re-start the test, if necessary
000-196-XXX	1.	Press F3 to review the log file
BIOS test halt, error threshold exceeded
	2.	Re-start the test to reset the log file
000-197-XXX	1.	Make sure the component that is called
BIOS test warning
		out is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 55
	2.	Re-run test
	3.	Replace the component that is called out
		in warning statement
	4.	Replace the component under test
000-198-XXX	1.	Make sure the component that is called
BIOS test aborted
		out is connected and/or enabled. See
		Chapter 6, “Using the Setup Utility,” on
		page 55
	2.	Flash the system and retest. See “Flash
		update procedures” on page 338
	3.	Go to “Undetermined problems” on page
		90
000-199-XXX	1.	Go to “Undetermined problems” on page
BIOS test failed, cause unknown
		90
	2.	Flash the system and re-test
	3.	Replace component under function test
000-250-XXX	1.	Flash the system. See “Flash update
BIOS APM failure
		procedures” on page 338
	2.	System board
000-270-XXX	1.	Flash the system. See “Flash update
BIOS ACPI failure
		procedures” on page 338
	2.	System board
001-000-XXX	No action
System Test Passed
001-00X-XXX	System board
System Error
001-01X-XXX	System board
System Error
001-024-XXX	System board
System Addressing test failure
001-025-XXX	1.	Flash the system. See “Flash update
System Checksum Value error
		procedures” on page 338
	2.	System board
001-026-XXX	1.	Flash the system. See “Flash update
System FLASH data error
		procedures” on page 338
	2.	System board

62Hardware Maintenance Manual