Removing and replacing the diskette drive

1.Open the cover. See “Opening the cover” on page 138.

2.Slide the diskette drive lock1to the unlocked position.

3.Rotate the drive bay assembly upward.

4.Slide the drive towards the rear of the computer and remove the drive.

5.Disconnect the flat cable from the failing drive.

6.Connect the flat cable to the new drive.

7.Install the new drive from the rear of the drive bay assembly and lock the drive into position.

8.To complete the installation, go to “Closing the cover and connecting cables” on page 159.

1.Turn off the computer and disconnect the power cord from the electrical outlet and from the computer.

2.Open the cover. See “Opening the cover” on page 138.

Lenovo 8098 manual Removing and replacing the diskette drive