6.Note the location of the memory modules, remove them from the failing system board, and install them on the new system board in the same location as they were on the failing system board. See “Removing and replacing memory” on page 96.

7.Remove the heat sink and microprocessor from the failing system board and install them on the new system board. See “Removing and replacing the microprocessor” on page 103.

Continue to the next step after installing the heat sink and microprocessor on the new system board.

8.Install the new system board by aligning the slots in the metal plate on the bottom of the system board with the tabs on the chassis and slide the system board toward the rear of the computer until the screw holes are aligned properly.

102Hardware Maintenance Manual

Page 108
Image 108
Lenovo 8098 manual Hardware Maintenance Manual