Seagate 240 DDS-4 manual Inserting a cartridge into the autoloader magazine

Scorpion 240 Autoloader Installation Manual A-23

3.Insert the cartridge into the magazine with the door facing toward the magazine slot, as shown in Figure 9.

Figure 9. Inserting a cartridge into the autoloader magazine

Cartridge door

Loading a magazine into the autoloader

Caution. Do not load a magazine if all the LEDs are flashing; this indicates that the drive is performing a power- on self test.

1.Make sure the drive is powered on and operating normally.

2.Hold the magazine so that the slot numbers are right- side-up.

3.Write protect or write-enable the magazine as appropriate. See page A-38 for details.

4.Insert the magazine into the autoloader with the triangles facing into the autoloader bay, as shown in Figure 10 on the following page. Gently push the magazine into the autoloader bay until the autoloader mechanism senses the magazine and pulls it inside.