Seagate 240 DDS-4 manual Configuration for the Windows NT environment, Operating System, Novell

Scorpion 240 Autoloader Installation Manual A-41

Configuration for the Windows NT environment

If you use Windows NT 4.0 with the 4mmDAT.SYS driver from Microsoft, you must set Switch 10 (the Inquiry-String switch) to OFF. If you use the STDAT4.SYS driver from Seagate, you can leave the Switch 10 in its default position (ON). Regardless of which driver you use, all four of the operating- system configuration switches should be left ON (the default positions).

Configuration for Novell environments

The following table summarizes the dip switch settings for various Novell operating systems and drivers. These configurations are described in greater detail in the following paragraphs.

Operating System /	Switch	Switch	Switch	Switch
tape driver software	5	6	7	8
Novell 4.11 w/ native	OFF	ON	ON	OFF
backup applet using
TAPEDAI driver or
NWTAPE.CDM driver
dated before 11/3/99
Novell 4.11 w/ native	ON	ON	ON	ON
backup applet using
NWTAPE driver dated
after 11/3/99
Novell 5.x w/ native	OFF	ON	ON	OFF
backup applet using
NWTAPE.CDM driver
dated before 11/3/99
Novell 5.x w/ native	ON	ON	ON	ON
backup applet using
NWTAPE.CDM driver
dated after 11/3/99

Novell 4.11

There are two possible ways to configure the Scorpion 240 to work with Novell 4.11, depending on which tape driver you use.