HP xw460c Blade ACL TCP/UDP Filter configuration, Sport 1-65535 port mask, Flags value 0x0-0x3f

Table 162 IPv4 Filter Configuration Menu options

Command	Description
proto <0-255>	Defines an IP protocol for the ACL. If defined, traffic from the specified protocol
	matches this filter. Specify the protocol number. Listed below are some of the
	well-known protocols.
	Number	Name
	1	icmp
	2	igmp
	6	tcp
	17	udp
	89	ospf
	112	vrrp
tos <0-255>	Defines a Type of Service value for the ACL. For more information on ToS, see
	RFC 1340 and 1349.
reset	Resets the IPv4 parameters for the ACL to their default values.
cur	Displays the current IPV4 parameters.

ACL TCP/UDP Filter configuration

Command: /cfg/acl/acl <1-762>/tcpudp

[Filtering TCP/UDP Menu]

sport	- Set to filter on		TCP/UDP source port
dport	- Set	to filter on TCP/UDP destination port
flags	- Set	to filter TCP/UDP flags
reset	- Reset all fields
cur	- Display current parameters

This menu allows you to define TCP/UDP matching criteria for an ACL. The following table describes the TCP/UDP Filter Configuration Menu options.

Table 163 TCP/UDP Filter Configuration Menu options

Command	Description
sport <1-65535> <port mask>	Defines a source port for the ACL. If defined, traffic with the specified TCP or
	UDP source port will match this ACL. Specify the port number. Listed below are
	some of the well-known ports:
	Number	Name
	20	ftp-data
	21	ftp
	22	ssh
	23	telnet
	25	smtp
	37	time
	42	name
	43	whois
	53	domain
	69	tftp
	70	gopher
	79	finger
	80	http
dport <1-65535>	Defines a destination port for the ACL. If defined, traffic with the specified TCP
	or UDP destination port will match this ACL. Specify the port number, just as
	with sport above.
flags <value (0x0-0x3f)>	Defines a TCP/UDP flag for the ACL.
reset	Resets the TCP/UDP parameters for the ACL to their default values.
cur	Displays the current TCP/UDP Filtering parameters.

Configuration Menu 149