Ospf Host Entry configuration

Command: /cfg/l3/ospf/host <1-128>

[OSPF Host Entry 1 Menu]

addr	- Set host entry IP address
aindex	- Set area index
cost	- Set cost of this host entry
enable	- Enable host entry
disable	- Disable host entry
delete	- Delete host entry
cur	- Display current OSPF host entry configuration

NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

The following table describes the OSPF Host Entry Configuration Menu options.

Table 139 OSPF Host Entry Configuration Menu options

Command	Description

addr <IP address>	Configures the base IP address for the host entry. For example,
	100.10.1.1

aindex <0-2>	Configures lays the area index of the host.

cost <1-65535>	Configures the cost value of the host.

enable	Enables OSPF host entry.

disable	Disables OSPF host entry.

delete	Deletes OSPF host entry.

cur	Displays the current OSPF host entries.

OSPF Route Redistribution configuration

Command: /cfg/l3/ospf/redist fixedstaticrip

[OSPF Redistribute Fixed Menu]

add	- Add rmap into route redistribution list
rem	- Remove	rmap from route redistribution list
export	- Export	all routes of this protocol
cur	- Display current route-maps added

NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

The following table describes the OSPF Route Redistribution Configuration Menu options.

Table 140 OSPF Route Redistribution Configuration Menu options

Command	Description

add <1-32> <1-32>all	Adds selected routing maps to the rmap list. To add all the 32 route maps,
	enter all. To add specific route maps, enter routing map numbers one per
	line, NULL at the end.
	This option adds a route map to the route redistribution list. The routes of the
	redistribution protocol matched by the route maps in the route redistribution list
	will be redistributed.

rem <1-32> <1-32> ... all	Removes the route map from the route redistribution list.
	Removes routing maps from the rmap list. To remove all 32 route maps, enter
	all. To remove specific route maps, enter routing map numbers one per line,
	NULL at end.

export <1-16777215> 12none	Exports the routes of this protocol as external OSPF AS-external LSAs in which
	the metric and metric type are specified. To remove a previous configuration
	and stop exporting the routes of the protocol, enter none.

cur	Displays the current route map settings.

	Configuration Menu 135