HP xw460c manual Igmp static multicast router configuration, Igmp filtering configuration, Filter

IGMP static multicast router configuration

Command: /cfg/l3/igmp/mrouter

[Static	Multicast		Router Menu]
add	- Add port as Multicast Router Port
rem	-	Remove port as Multicast Router Port
cur	-	Display	current Multicast Router configuration

The following table describes the Static Multicast Router Configuration Menu options.

NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is disabled for that VLAN.

Table 144 IGMP Static Multicast Router Menu

Command	Description
add <port number> <1-4095><1-2>	Selects a port/VLAN combination on which the static multicast router
	is connected, and configures the IGMP version (1 or 2) of the
	multicast router.

NOTE: Port number must be an external port (19-24).

remove <port number> <1-4095><1-2>Removes a static multicast router from the selected port/VLAN combination.

cur Displays the current IGMP Static Multicast Router parameters.

IGMP filtering configuration

Command: /cfg/l3/igmp/igmpflt

[IGMP Filter Menu]

filter - IGMP Filter Definition Menu port - IGMP Filtering Port Menu

ena - Enable IGMP Filtering dis - Disable IGMP Filtering

cur - Display current IGMP Filtering configuration

The following table describes the IGMP Filter Configuration Menu options.

Table 145 IGMP Filtering Menu

Command	Description
filter <1-16>	Displays the IGMP Filter Definition Menu.
port <port number>	Displays the IGMP Filtering Port Menu.
ena	Enables IGMP filtering globally.
dis	Disables IGMP Filtering globally.
cur	Displays the current IGMP Filtering parameters.

Configuration Menu 138