HP xw460c Blade manual IP Access List configuration, Autonomous System Path configuration

Table 128	Route Map Configuration Menu options
Command	Description
enable	Enables the route map.
disable	Disables the route map.
delete	Deletes the route map.
cur	Displays the current route configuration.

IP Access List configuration

Command: /cfg/l3/rmap <1-32>/alist <1-8>

[IP Access List		1 Menu]
nwf	-	Network Filter number
metric	-	Metric
action	-	Set Network Filter action
enable	-	Enable Access List
disable	-	Disable Access List
delete	-	Delete Access List
current	-	Display current Access List configuration

NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to configure. The following table describes the IP Access List Configuration Menu options.

Table 129 IP Access List Configuration Menu options

Command	Description
nwf <1-256>	Sets the network filter number.
metric <1-4294967294>none	Sets the metric value in the AS-External (ASE) LSA.
action permitdeny	Permits or denies action for the access list.
enable	Enables the access list.
disable	Disables the access list.
delete	Deletes the access list.
cur	Displays the current Access List configuration.

Autonomous System Path configuration

Command: /cfg/l3/rmap <1-32>/aspath <1-8>

[AS Filter 1 Menu]
as	- AS number
action	- Set AS	Filter action
enable	- Enable	AS Filter
disable	- Disable AS Filter
delete	- Delete	AS Filter
current	- Display current AS Filter configuration

NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.

Configuration Menu 127