HP xw460c Blade Ospf information, Nbr nbr router-id A.B.C.D, Dbase Sumaddr Nsumadd Routes Dump

OSPF information

Command: /info/l3/ospf

	[OSPF Information Menu]
	general	- Show general information
	aindex	- Show area(s) information
	if	- Show interface(s) information
	virtual	- Show details of virtual links
	nbr	- Show neighbor(s) information
	dbase	- Database Menu
	sumaddr	- Show summary address list
	nsumadd	- Show NSSA summary address list
	routes	- Show OSPF routes
	dump	- Show OSPF information
NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
The following table describes the OSPF Menu options.
Table 32 OSPF information
Command			Usage
general			Displays general OSPF information.
aindex <0-2>			Displays area information for a particular area index. If no
			parameter is supplied, it displays area information for all the
			areas.
if <1-256>			Displays interface information for a particular interface. If no
			parameter is supplied, it displays information for all the
			interfaces.
virtual			Displays information about all the configured virtual links.
nbr <nbr router-id (A.B.C.D)>			Displays the status of a neighbor with a particular router ID. If
			no router ID is supplied, it displays the information about all
			the current neighbors.

dbase

sumaddr <0-2>

nsumadd <0-2>

routes

dump

Displays OSPF database menu.

Displays the list of summary ranges belonging to non-NSSA areas.

Displays the list of summary ranges belonging to NSSA areas.

Displays OSPF routing table.

Displays all OSPF information.

Information Menu 47