The following table describes the Layer 3 Information Menu options.
Table 26 Layer 3 information menu options
Command | Usage | |
|
| |
route | Displays the IP Routing Menu. Using the options of this menu, the system displays the following for | |
| each configured or learned route: | |
| • Route destination IP address, subnet mask, and gateway address | |
| • | Type of route |
| • Tag indicating origin of route | |
| • Metric for RIP tagged routes, specifying the number of hops to the destination | |
|
| 16 for infinite hops) |
| • The IP interface that the route uses | |
|
| |
arp | Displays the Address Resolution Protocol (ARP) Information Menu. | |
|
| |
*ospf | Displays OSPF routing Information Menu. | |
|
| |
*rip | Displays Routing Information Protocol Menu. | |
|
| |
ip | Displays IP Information. IP information, includes: | |
| • IP interface information: Interface number, IP address, subnet mask, VLAN number, and | |
|
| operational status. |
| • Default gateway information: Metric for selecting which configured gateway to use, gateway | |
|
| number, IP address, and health status |
| • IP forwarding information: Enable status, lnet and lmask | |
| • | Port status |
|
| |
igmp | Displays IGMP Information Menu. | |
|
| |
*vrrp | Displays the VRRP Information Menu. | |
|
| |
dump | Dumps all switch information available from the Layer 3 Menu (10K or more, depending on your | |
| configuration). | |
| If you want to capture dump data to a file, set your communication software on your workstation | |
| to capture session data prior to issuing the dump commands. |
* indicates menus that are available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
Route information
Command: /info/l3/route | ||
|
| |
| [IP Routing Menu] | |
| find | - Show a single route by destination IP address |
| gw | - Show routes to a single gateway |
| type | - Show routes of a single type |
| tag | - Show routes of a single tag |
| if | - Show routes on a single interface |
| dump | - Show all routes |
|
|
|
Using the commands listed below, you can display all or a portion of the IP routes currently held in the switch.
Table 27 Route Information menu options
Command | Usage | |
|
|
|
find <IP address> | Displays a single route by IP address. For example, | |
| 100.10.1.1 |
|
|
|
|
gw <IP address> | Displays routes to a single gateway. For example, | |
| 100.10.1.2 |
|
|
|
|
type indirectdirectlocal | Displays routes of a single type. | |
broadcastmartianmulticast |
|
|
|
|
|
tag fixedstaticaddrripospf | Displays routes of a single tag. | |
broadcastmartianmulticast |
|
|
|
|
|
if <IP address> | Displays routes on a single interface. | |
|
|
|
dump | Displays all routes configured in the switch. | |
|
|
|
| Information Menu 44 |