Table 78 System Configuration Menu options
Command | Usage |
|
|
date | Prompts the user for the system date. |
|
|
time | Configures the system time using a |
|
|
timezone | Configures the time zone where the switch resides. You are prompted |
| to select your location (continent, country, region) by the timezone |
| wizard. Once a region is selected, the switch updates the time to |
| reflect local changes to Daylight Savings Time, etc. |
|
|
idle | Sets the idle timeout for CLI sessions, from 1 to 60 minutes. The default |
| is 5 minutes. |
| This setting affects both the console port and Telnet port. |
|
|
notice | Displays login notice immediately before the “Enter password:” |
line> | prompt. This notice can contain up to 1024 characters and new lines. |
|
|
bannr | Configures a login banner of up to 80 characters. When a user or |
| administrator logs into the switch, the login banner is displayed. It is |
| also displayed as part of the output from the /info/sys/gen |
| command. |
|
|
hprompt disableenable | Enables or disables displaying of the host name (system administrator’s |
| name) in the command line interface. |
|
|
bootp disableenable | Enables or disables the use of BOOTP. If you enable BOOTP, the |
| switch will query its BOOTP server for all of the switch IP parameters. |
| The default value is enabled. |
|
|
dhcp disableenable | Enables or disables Dynamic Host Control Protocol for setting the |
| management IP address on interface 256. When enabled, the IP |
| address obtained from the DHCP server overrides the static IP address. |
| The default value is enabled. |
|
|
reminders disableenable | Enables or disables reminder messages in the CLI. The default value is |
| enabled. |
|
|
cur | Displays the current system parameters. |
|
|
System host log configuration
Command: /cfg/sys/syslog
[Syslog Menu] |
|
host | - Set IP address of first syslog host |
host2 | - Set IP address of second syslog host |
sever | - Set the severity of first syslog host |
sever2 | - Set the severity of second syslog host |
facil | - Set facility of first syslog host |
facil2 | - Set facility of second syslog host |
console | - Enable/disable console output of syslog messages |
log | - Enable/disable syslogging of features |
cur | - Display current syslog settings |
The following table describes the Syslog Configuration Menu options.
Table 79 Syslog Configuration Menu options
Command | Description | |
|
|
|
host <IP address> | Sets the IP address of the first syslog host. For example, | |
| 100.10.1.1 |
|
|
|
|
host2 <IP address> | Sets the IP address of the second syslog host. For example, | |
| 100.10.1.2 |
|
|
|
|
sever | Sets the severity level of the first syslog host displayed. The | |
| default is 7, which means log all the severity levels. | |
|
|
|
| Configuration Menu 91 | |
