HP xw460c Blade Port mirroring, Rlimit -2147483647 to, Flimit -2147483647 to, Monport port number

Table 174 RMON Alarm Menu options

Command	Description
sample absdelta	Configures the method of sampling the selected variable and calculating
	the value to be compared against the thresholds, as follows:
	abs: absolute value, the value of the selected variable is compared directly
	with the thresholds at the end of the sampling interval.
	delta: delta value, the value of the selected variable at the last sample is
	subtracted from the current value, and the difference compared with the
	thresholds.
almtype risingfallingeither	Configures the alarm type as rising, falling, or either (rising or falling).
rlimit < -2147483647 to	Configures the rising threshold for the sampled statistic. When the current
2147483647>	sampled value is greater than or equal to this threshold, and the value at
	the last sampling interval was less than this threshold, a single event is
	generated.

flimit < -2147483647 to 2147483647>

Configures the falling threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event is generated.

revtidx <0-65535>	Configures the rising alarm event index that is triggered when a rising
	threshold is crossed.
	The range is from 0 to 65535. The default value is 0.
fevtidx <0-65535>	Configures the falling alarm event index that is triggered when a falling
	threshold is crossed.
	The range is from 0 to 65535. The default value is 0.
owner <1-127 characters>	Enter a text string that identifies the person or entity that uses this alarm
	index.
	The owner can have a maximum of 127 characters.
delete	Deletes this alarm index.
cur	Displays the current RMON Alarm parameters.

Port mirroring

Command: /cfg/pmirr

[Port Mirroring		Menu]
mirror	-	Enable/Disable Mirroring
monport -		Monitoring Port based PM Menu
cur	-	Display All Mirrored and Monitoring Ports

The Port Mirroring Configuration Menu is used to configure, enable, and disable the monitored port. When enabled, network packets being sent and/or received on a target port are duplicated and sent to a monitor port. By attaching a network analyzer to the monitor port, you can collect detailed information about your network performance and usage. Port mirroring is disabled by default.

NOTE: See the “Troubleshooting tools” appendix in the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Application Guide for information on how to use port mirroring.

The following table describes the Port Mirroring Configuration Menu options.

Table 175 Port Mirroring Configuration Menu options

Command	Description
mirror disableenable	Enables or disables port mirroring
monport <port number>	Displays port mirroring menu.
cur	Displays current settings of the mirrored and monitoring ports.

Configuration Menu 155