HP xw460c Blade manual Failure Detection Pair configuration, Link to Monitor configuration

Failure Detection Pair configuration

Command: /cfg/ufd/fdp

[FDP Menu]
ltm	- Link to Monitor Menu
ltd	- Link to Disable Menu
ena	- Enable FDP
dis	- Disable FDP
current	- Display current FDP configuration

Use these commands to configure a Failure Detection Pair, which consists of one Link to Monitor (LtM) and one Link to Disable (LtD). When the switch detects a failure on the LtM, it automatically disables the ports in the LtD.

The following table describes the Failure Detection Pair (FDP) configuration Menu options.

Table 178 Failure Detection Pair Configuration Menu options

Command	Description
ltm	Displays the Links to Monitor menu.
ltd	Displays the Links to Disable menu.
ena	Enables the FDP Parameters.
dis	Disables the FDP Parameters.
current	Displays the current FDP configuration.

Link to Monitor configuration

Command: /cfg/ufd/fdp/ltm

[Failure Link	to Monitor Menu]
addport	- Add port to Link to Monitor
remport	- Remove port from Link to Monitor
addtrnk	- Add trunk to Link to Monitor
remtrnk	- Remove trunk from Link to Monitor
cur	- Display current LtM configuration

The following table describes the Link to Monitor (LtM) Menu options. The LtM can consist of only one uplink port (ports 20-24) or a single trunk containing only uplink ports.

Table 179 Link to Monitor Menu options

Command	Description
addport <port number>	Adds a port to the LtM. Only uplink ports (20-24) are allowed in the LtM.
remport <port number>	Removes a port from the LtM.
addtrnk <1-12>	Adds a trunk group to the LtM. The LtM trunk group can contain only uplink ports
	(20-24).
remtrnk <1-12>	Removes a trunk group from the LtM.
cur	Displays the current LtM configuration.

Configuration Menu 157